Table 4.2 Data for flux linkage error
ERROR IN FLUX LINKAGE (Wb) WITH DTC ERROR IN FLUX LINKAGE (Wb) WITH FUZZY TIME
0 0 0
18 2.4 1
12 1.5 2
14 1.7 3
13.33 1.733 4
13.33 1.733 10
Figure 4.2 Result for flux linkage when fuzzy logic with duty ratio and DTC were used.
In the analysis, the data in the table were used. The flux behavior of the motor used in fuzzy logic together with duty ratio control and DTC for a torque command of 2.4Wb with an output drive updated at a of rate 5kHz was used, the ripple flux produced was 4.67Wb (18-13.33)Wb greater and lesser values with DTC, in fuzzy logic together with duty ratio control, the ripple was minimized to 0.667Wb (2.4-1.733)Wb higher and lower values, assumed under shoot in the flux value at the starting point of each voltage sector were neglected..